Warehouse/Storage
Warehouse/Storage
Check out our extensive range of workspace products. Use the filters to assist your search.
Product categories under Warehouse/Storage
Warehouse/Storage Products
Showing 25–48 of 80 results
-
DIESEL RADIANT HEATER 40KW
The Fanmaster HDR40 Diesel Radiant Heater is a 40KW discreet, odourless substitute for our Fan Heaters.
Infrared heat is sent straight forward, meaning unaffected airflow, which creates a more comfortable, quiet & dust free environment. Easy to move & operate, this heater comes equipped with a ceramic fibre combustion chamber ensuring a longer life.
This unit can also be run by using kerosene providing a cleaner burn.
-
Double Door Truck Under-Body Toolbox
Workspace Systems 2 door underbody tool boxes are durable and reliable tool boxes and is and from 1.5mm steel and powder coated black. They have stainless steel t-handle lock per door & a rubber seal to make them water resistant. They utilize a stainless steel retaining wire ropes attached from the doors to the box to prevent the doors from swinging open and banging on the ground. These 1000mmL under body toolboxes are a great addition for any truck.
-
Drive-in Pallet Racking
Workspace drive in racking is a high-density storage solution using the FILO principle ( first in last out ). They are designed for customers with a low number of high volume, high turnover lines where time and volume are of the essence. This storage solution allows much higher pallet densities then selective pallet racking and can be customised to suit your application. Workspace pallet racking has also been tested to AS 4084-2012,and our drive drive-in system is also designed according to FEM 10.2.07.
-
End Row Wrap Barriers
The Workspace systems End Wrap is designed to give you the best availability rack protection for the end of your rack. It comes with a full plate steel face panel to prevent low accidental impacts by your forklifts with the end of a single or double row of pallet racking and wraps around the end to provide corner protection as well in one built in unit. 1040mm wide end row wrap is designed to go at the end of a single row and the 2350mm wide end row wrap is designed for a standard 430mm spaced back-to-back aisle.
-
External Pallet Racking
Apex Pallet Racking has been tested to and fully complies with latest Australian racking code AS 4084-2012
Apex Pallet Racking has also been manufactured to meet the following standards:
- FEM 10.2.02 European code of practice for the design of static steel pallet racks
- AS1250-1981 SAA Steel structures code
- AS1538-1988 SAA Cold-form steel structures code
- SEMA-1980 (UK) Storage equipment manufacturers’ association of practice for the design and use of static pallet racking
- RMI-1985 (USA) Rack manufacturers’ institute specification of the design, testing and utilization of industrial steel racks
- AS4084-2012 Steel racking standards and codes that have since been revised or superseded.
Apex Rack selective pallet racking system uses the first in – first out principle to retrieve pallets.
Numerous racking accessories such as mesh decks, boards with board supports, rack protection etc. are available. Ask us in store today.
-
Feeder Trolley
The Mobile Louver Trolley For Your Needs.
The Fischer Combo Storage Trolley and standard Feeder Trolley is the perfect solution for a workshop or laboratory. On premium castors, this unit will allow you to customise and take your parks around the room with you.
Pictured: 1H-100 Combo Trolley
-
Fischer Louvre Panel Range
Maximise Your Storage By Wall Hanging.
Fischer Plastics optimised their louver panel range to suit a vast range of Fischer products including Stor-Paks, Visi-Paks, Drawer Organisers and more.
You can maximise your storage space by utilising a wall hanging system and easily transport parts. Available in Fischer’s in house made ABS plastic or locally sourced Metal.
Pictured: 1H-083 with Mesh-Pak 60 and Medium Visi-Pak hanging.
-
Fischer Stor-Pak Range
The Fischer Stor-Pak Range was the first of its kind to hit the Australian market and had become the most recognisable and popular Fischer product.
The Stor-Pak is the perfect way to organise spare parts and equipment whether it be in you your van, on shelving / warehousing, benches or wall hung. The Stor-Pak is seen across almost every industry and with such versatility.
Pictured: 1H-200B, 1H-063B, 1H-062B, 1H-061B and 1H-060B
-
Fork Entry Bars
Our fork entry bars are designed to provide forklift access for un-palletised goods such as plasterboard ad chipboard.
These entry bars sit above the beam by 100mm. Each fork entry bar is designed to hold 500kg UDL each.
A safer solution then using wooden gluts / chocks because the entry bars lock into position over the beams. This prevents any movement on the smooth beam surface.
-
Galvanised Mesh Cage
Galvanised Mesh Cage, 1150mm Long x 1150mm Wide High. Our galvanised mesh cages are an excellent form of warehouse and yard storage. These units are stackable as well as having the capability of being stored in a pallet rack. Each unit is capable of being folded down for east storage when not in use. These units are constructed of 6mm mesh all over to ensure a great strength to weight ratio.
-
Heavy Duty Cantilever Racking (C350)
Workspace Systems heavy-duty cantilever racking system are perfect for storing long, awkwardly shaped and oversized objects. The Racking system is specifically designed to handle oddly shaped materials, giving you maximum storage capabilities with an easily accessible design that is perfect for all industrial environments.
-
Imported Value Long Span Shelving
Imported value Longspan Shelving heavy duty with metal shelving
(2mH x 2mL x 0.6mD)
Specifications
- Capacity:
- 300KG per level (Uniformly Distributed Load)
- 1200KG Total Capacity (UDL) per Bay
- Uprights:
- Height: 2000mm
- Depth: 600mm
- Beams
- Length: 1835mm
- Capacity:
-
INDUSTRIAL DIESEL FAN HEATER 30KW SERIES 3
The Fanmaster IDH3 (Series 3) Industrial Diesel Fan Heater is a 30KW direct fired heater that is designed to provide an instant effective and reliable source of heat to a wide range of industrial, agricultural and commercial users.
The IDH3-30 heater can run on diesel or kerosene fuel, it comes complete with an integrated fuel tank, durable wheels and heavy duty handle for mobility. The top cover design allows for easy access for maintenance and servicing.
The digital display shows room (ambient) and setting temperature which is controlled by an adjustable thermostat where you can set a predetermined temperature. When the air temperature reaches the set temperature the heater will shut off and once the ambient temperature drops below the set temperature the heater will automatically turn back on.
Ideally suited for warming well ventilated warehouses and large workshop areas, construction & building sites and drying applications.
-
INDUSTRIAL LPG FAN HEATER 20KW
The Fanmaster 20KW industrial LPG fan heater is a portable, compact gas heater that provides instant effective and reliable heat to a wide range of industrial, agriculture and commercial users.
The unit comes complete with a hose and regulator. it offers safety features such as over temperature, electrical and fuel cut offs. Ideally suited for warming warehouses and large work shop areas, building applications and drying applications.
This unit must be used in well ventilated areas and is for industrial use only.
-
Jialift 500kg Single Scissor Table Lift TF50
Rear braking system. Lockable swivel urethane castors.
It’s designed with a foot pump to elevate the table height reducing strain and fatigue from bending over.Powder-coated safety orange for hi-visibility and extra protection from wear and tear.
-
JIALIFT DB685 BASIC PALLET TRUCK
Frequency heavy lifting and carrying items from place to place is one good reason that you must have suitable material handling equipment for your day-to-day tasks.
It is helping you with carrying heavy items, increases work productivity and saves more time.
-
Light Duty Cantilever Racking (C200)
Our light-duty cantilever racking systems are perfect for storing long, awkwardly shaped and oversized objects. Our C200 (light duty) cantilever racking has been designed according to the FEM 10.2.09 and is engineered in Australia. We can design and certify their cantilever racking for any application, whether installed inside a warehouse or if it was to…
-
Light Duty Rivet Shelving
Galvanised rivet shelving is used for a variety of applications including box or archive storage, storerooms, parts storage, workshops and even cool room shelving.
Its electro galvanised surface treatment and the ability to remove the shelves and clean them means it can be used as cool room shelving. Being electro galvanized (otherwise known as zinc plated) the surface is metallic and caution should be used when choosing a cleaning product. A neutral cleaner is only to be used (Neutral in PH soapy water is recommended) so that a chemical reaction does not take place on the zinc plating itself. It should also be noted that food products that may spill on the shelving itself needs to be cleaned immediately to avoid this type of chemical reaction also, as some foods can be acidic and which can cause a similar reaction which appears on the shelving as a discolouration to the zinc plating. Some examples of acidic foods are citrus fruits, tomatoes, pineapple, vinegar, picked foods, or strawberries just to list a few, and these among others need to be cleaned immediately to avoid a reaction to the zinc plated surface.
Available in a variety of shelf types, the chipboard is commonly used for general purpose applications and the steel galvanised deck is generally used for grocery applications and the mesh deck for cool rooms.
Some other features include a wide range of heights, depths and bay lengths to accommodate almost any layout. The feet are adjustable to make it easy to level the shelving where the floor surface is uneven. And the step beam allows a flush fitting of 18mm particle board. Beam ties are used to hold together the front and back z-beams, which also strengthens the shelving unit.
-
Load signs
The Global load signs are made from an Aluminum exterior and composite core, they can be used indoors or outdoors.
Load signs used for pallet racking, drive in racking, cable racking and cantilever racking must be fixed to the end of the frame and above 2000mm from the ground. Signs for other applications will need to be installed in a position which can be viewed by the user of the equipment.
-
Longspan Shelving
Longspan shelving provides an inexpensive storage solution which is ideal for multitude of of applications including: box storage, Archive shelving, Storerooms, Workshops, Workbenches and many more.
-
Longspan Shelving
Storage is an extremely crucial aspect for any warehouse or home shed.
Having the right storage system in place is the best way to maximise storage space and increase productivity, so a proper shelving system is a must to keep all stored items and goods organised.
Our longspan shelving can be easily configured to suit your requirements and there are numerous applications available, whether you are expanding your facilities or upgrading an existing storage shelving system.
Longspan shelves are a highly practical solution for numerous applications.
-
Louvered Panels
Louvered Panels
Our Louvered panels are a great method of tidying up your shed or storage area.Flat Type Louvre Panels
Designed to be attached to either a wall or upright surface such as a Global Workbench or 460mm deep our longspan bay. Perfectly suited with Our small parts binsRolled Type Louvre Panels
Commonly used for our Mobile Feeder Trolley
-
Matting Range
Perfect For Warehouse, Garages and Workplaces.
The Fischer matting range offers a strong and cost-effective solution for workspace matting and broader safety flooring in garages and warehouses.
Comes in 400mm and 600mm tiles that interlock together to cover you desired space.
Pictured: 1H-084 Lok-A-Mat 400mm
-
Medium Duty Cantilever Racking (C305)
Workspace Systems medium-duty cantilever racking systems are perfect for storing long, awkward shaped and oversized objects. The racking system is specifically designed to handle oddly shaped materials, giving you maximum storage capabilities with an easily accessible design that is perfect for all industrial environments. Powder-coated and hot-dipped galvanised finishes available.